Automatic Devices Company

A Track & Machine
For Every Purpose

160 Moto-Trac®

 

MOTO-TRAC ® is an aluminum motorized track system for straight layouts of light to medium weight draperies. The track can be one-way draw or bi-parting. This system can provide an unlimited amount of center overlap if it is specified as such when ordering. Standard overlap is 12" (6" in front of 6" at the center overlap). The machine operator for this track system is attached directly to one end of the track channel (location must be specified when ordering) and is supported by an overhead structure directly above the machine. The machine is concealed by the drapery fabric via a tie-off point for the last pleat or grommet of the curtain.

The curtain machine specifications are similar to those of  the Tom Thumb® Model 872-MCS except that the limit switches are direct strike and are located at on the machine.  The curtain stops automatically at its fully opened and fully closed positions.

This track system cannot be suspended, it must be directly mounted to an overhead structure.  Maximum curtain weight for this system is 75 pounds.

When determining the side of the track system the motor is located when ordering (left or right), the view is standing in the room looking out the window with the track attached above the window.

SPECIFICATIONS:

MOTO-TRAC® 160 SERIES CURTAIN TRACKS: Curtain tracks (Model 1600) shall be of 16 gauge aluminum,consisting of two side-by-side runways entirely enclosedexcept for slots in bottom, and shall be in one continuous pieceexcept where splicing clamps are required. Curtain carriers(Model 1131) shall be spaced on 6” centers and shall be composedof a non-wheel-binding block supporting two polyethylenewheels rolling on two parallel treads. One end of the trackshall contain a Dead-end pulley (Model 1634) with a 1-1/4”dia. steel ball-bearing wheel adjustable for cable tension. Theother end shall be equipped with a 1/30 HP gear motor withlimit switches activated by the drapery carriers. Start-stopreverseaction shall be provided by a magnetic control systemand push button type remote control switches.Model 160 as manufactured by Automatic Devices Companyof Allentown, PA.

MOTO-TRAC® Model 160B Curtain Tracks: Curtain tracks (Model 1600) shall be of 16 gauge aluminum,consisting of two side-by-side runways entirely enclosedexcept for slots in bottom, and shall be in one continuouspiece except where splicing clamps are required. Curtain carriers(Model 1131B) shall be spaced on 6” centers and shallbe composed of a non-wheel-binding block supporting twonylon-tired ball-bearing equipped wheels rolling on two paralleltreads. One end of the track shall contain a Dead-end pulley(Model 1634) with a 1-1/4” diameter steel ball-bearing wheel,adjustable for cable tension. The other end shall be equippedwith a 1/30 HP gear motor with limit switches activated by thedrapery carriers. Start-stop-reverse action shall be providedby a magnetic control system and push button type remotecontrol switches.Model 160B as manufactured by Automatic Devices Companyof Allentown, PA.

MOTO-TRAC® Model 160 Hand Operated Curtain Tracks: Curtain tracks (Model 1600) shall be of 16 gauge aluminum, consistingof two side-by-side runways entirely enclosed except forslots in bottom, and shall be in one continuous piece except wheresplicing clamps are required. Curtain carriers (Model 1131) shallbe spaced on 6” centers and shall be composed of a non-wheelbindingblock supporting two polyethylene wheels rolling on twoparallel treads. One end of the track shall contain a Dead-end pulley(Model 1634) with a 1-1/4” diameter steel ball-bearing wheel,adjustable for cable tension. The other end shall be equipped witha Live-end pulley (Model 1603) with 2 each 1-1/4” diameter steelball-bearing wheels. System shall be furnished with a Floor pulley(Model 1135) equipped with a tension spring to maintain tension onthe operating cord (Model 1150).Model 160 as manufactured by Automatic Devices Company ofAllentown, PA.

MOTO-TRAC® Model 160B Hand Operated Curtain Tracks: Curtain tracks (Model 1600) shall be of 16 gauge aluminum, consistingof two side-by-side runways entirely enclosed except forslots in bottom, and shall be in one continuous piece except wheresplicing clamps are required. Curtain carriers (Model 1131B) shallbe spaced on 6” centers and shall be composed of a non-wheelbindingblock supporting two nylon-tired ball-bearing equippedwheels rolling on two parallel treads. One end of the track shallcontain a Dead-end pulley (Model 1634) with a 1-1/4” diametersteel ball-bearing wheel, adjustable for cable tension. The otherend shall be equipped with a Live-end pulley (Model 1603) with2 each 1-1/4” diameter steel ball-bearing wheels. System shall befurnished with a Floor pulley (Model 1135) equipped with a tensionspring to maintain tension on the operating cord (Model 1150).Model 160B as manufactured by Automatic Devices Companyof Allentown, PA.

DOCUMENTS & DOWNLOADS:

You must be logged in to view these files.