Automatic Devices Company

A Track & Machine
For Every Purpose

114 Vers-Util® Track

 

Model 114 VERS-UTIL® is a reverse-curvable, aluminum track which can be either manually operated or motorized. The track can be one-way draw or bi-parting and is used for light to medium weight draperies on small stages, curved windows, room dividers, etc. The operating cord is concealed in the upper channel of the track.

MODEL 114-BS, 114-BC VERS-UTIL® iare reverse-curvable, aluminum track which can be either manually operated or motorized. The track can be one-way draw or bi-parting and is used for light to medium weight draperies on small stages, curved windows, room dividers, etc. The operating cord is concealed in the upper channel of the track. These models are equipped with Model 1131-B ball-bearing carriers.

A sketch or template is required with each order for Model 114 curved tracks, as the channel must be factory-curved.

Minimum radius: 1' (layout dependent).

SPECIFICATIONS:

Model 114 VERS-UTIL® Track: Curtain tracks (Model 1140) shall be of 16 gauge extruded aluminum construction, anodized finish, entirely enclosed, except for slot in bottom and top, and in one continuous piece except where splicing clamps are required.  Curtain carriers (Model 1131) shall be spaced on 6" centers and shall be composed of a special non-wheel binding abrasion-resistant block supporting two polyethylene wheels rolling on two separate parallel treads. Live-End (Model 1143) and Dead-End (Model1144) pulley blocks shall be equipped with nylon ball-bearing wheels adequately guarded. The manufacturer shall furnish a tension Floor Pulley (Model 1145) for increasing cord tension. Stretch-resistant operating cord (Model 2160 for hand operated track systems and Model 1152 for motorized track systems) shall have synthetic or wire center and shall be of 1/8" diameter. Operating lines shall be concealed within the track. Model 114 as manufactured by Automatic Devices Company of Allentown, PA.

Model 114-BS, 114-BC VERS-UTIL® Track: Curtain tracks (Model 1140) shall be of 16 gauge extruded aluminum construction, anodized finish, entirely enclosed, except for slot in bottom and top, and in one continuous piece except where splicing clamps are required. Curtain carriers shall be spaced on 6" centers and shall be composed of a special non-wheel binding abrasion-resistant block supporting two Model 1131B nylon-tired ball-bearing equipped wheels rolling on two separate parallel treads. Live-End (Model 1143) and Dead-End (Model 1144) pulley blocks shall be equipped with nylon ball-bearing wheels adequately guarded. The manufacturer shall furnish a tension Floor Pulley (Model 1145) for increasing cord tension. Stretch-resistant operating cord (Model 2160 for hand operated track systems and Model 1152 for motorized track systems) shall have synthetic or wire center and shall be of 1/8" diameter. Operating lines shall be concealed within the track. Model 114 as manufactured by Automatic Devices Company of Allentown, PA.

DOCUMENTS & DOWNLOADS:

You must be logged in to view these files.