Automatic Devices Company

A Track & Machine
For Every Purpose

113 Specifine®

 

Model 113 SPECIFINE® track is an aluminum box-shaped curtain track specifically designed to meet architectural specifications for straight curtains up to 20' in length. Classrooms, residences, boardrooms, multi-purpose rooms, cafeterias, churches, hotels, banks, are all ideal applications for the Model 113 SPECIFINE® track. This track can be either recessed, surface mounted, or can be suspended from the ceiling. The cord is completely concealed within the track channel. The carriers move effortlessly through the track channel without the carrier block binding against the channel. Dovetail design on exterior of channel allows joint compound to seep into slot allowing a flush finish.

 

SPECIFICATIONS:

Model 113 SPECIFINE® Curtain Tracks: Curtain tracks (Model 1100-A) shall be of 16 gauge extruded aluminum construction, anodized finish, entirely enclosed, except for slot in bottom, and in one continuous piece except where splicing clamps are required. Each curtain carrier (Model 1131) (Model 1133) and Dead-End (Model1134) pulley blocks shall be equipped with nylon ball-bearing wheels adequately guarded. The manufacturer shall furnish a tension Floor Pulley (Model 1135) for increasing cord tension.Stretch-resistant operating cord (Model 1150 for hand operated track systems and Model 1151 for motorized track systems) shall have synthetic or wire center and shall be of 1/8" diameter. Operating lines shall be concealed within the track. Model 113 as manufactured by Automatic Devices Company of Allentown, PA. shall be spaced on 6" centers and shall be composed of a special non-wheel binding abrasion-resistant block supporting two polyethylene wheels rolling on two separate parallel treads. Live-End (Model 1133) and Dead-End (Model 1134) pulley blocks shall be equipped with nylon ball-bearing wheels adequately guarded. The manufacturer shall furnish a tension Floor Pulley (Model 1135) for increasing cord tension. Stretch-resistant operating cord (Model 1150 for hand operated track systems and Model 1151 for motorized track systems) shall have synthetic or wire center and shall be of 1/8” diameter. Operating lines shall be concealed within the track. Model 113 as manufactured by Automatic Devices Company of Allentown, PA.

Model 113-A SPECIFINE® Curtain Tracks (Walk-Along Track System) Curtain tracks (Model 1100-A) shall be of 16 gauge extruded aluminum construction, anodized finish, entirely enclosed, except for slot in bottom, and in one continuous piece except where splicing clamps are required. Each curtain carrier (Model 1131) shall be spaced on 6” centers and shall be composed of a special non-wheel binding abrasion-resistant block supporting two polyethylene wheels rolling on two separate parallel treads. End Stops (Model 1109) shall be attached to each open end of the track channel. This model track system is for walk-along operation only and does not include pulleys or other operating hardware. Model 113-A as manufactured by Automatic Devices Company of Allentown, PA.

DOCUMENTS & DOWNLOADS:

You must be logged in to view these files.